Rooftop Support Feet.
A versatile support solution for pipe work, cable trays, smaller outdoor condensing units and air source heat pump installations. The feet have a section of 41×21 channel bonded into the top surface for use with standard strut type fixings.
Lengths of 250mm, 400mm, 600mm & 1000mm are available in 95mm height with the two smallest lengths also available in a low profile 50mm height. They are manufactured from recycled SBR rubber so are not only eco-friendly, but possess good vibration and noise suppression qualities too.
Suitable for internal or external use at temperatures from -40°C to +80°C. BSEN60068-2-14.
“H” base Supports.
The “H” bases enable 41×41 channel to be inserted vertically in order to produce a “post” or “H” design support frame. The standard size is 305mm x 305mm and will support up to 350kg.
The bases are manufactured from High Density Polyethylene (HDPE) and are supplied complete with an anti-vibration pad securely adhered to the bottom surface. This also prevents any penetration of the roof membrane when in position.
“H” bases can be purchased as a single base, or as a kit of two bases complete with two 1Hx1H angle brackets and all screws/spring nuts required to form a single level “H” frame. Click on the button below to place an order.