Cable management products, pipe support systems & fixings     Tel: 020 7537 6500     Fax: 020 7537 6501     Email: sales@hobbyhomes.com

Pyramid Roof Supports

Pyramid ST.

Pyramid ST supports are constructed from thermoplastic with a UV stabilizer. The channel on the top surface is HDG finish to meet the harshest of exterior environments. We hold stock of two lengths and two heights for maximum flexiblity of install requirements.

The 254mm long supports have a maximum working load of 445kg each and the 406mm long have a maximum working load of 667kg but can be combined together to increase the loading .

 

The pyramid ST are available in the following sizes (L x W x H) ;

100mm High.

Dimensions : 254 x 203 x 100 (mm)

Dimensions : 406 x 203 x 100 (mm)

150mm High.

Dimensions : 254 x 203 x 150 (mm)

Dimensions : 406 x 203 x 150 (mm)

 

The top of the Pyramid support is a standard section of support channel and will accept spring nuts or "M" range pipe clips

Fixing pipes or cable management systems could not be easier.

 

 

 

Pyramid H Base.

Pyramid H Base supports are constructed from the same thermoplastic as the ST range. They are designed to accept a standard 41mm x 41mm channel vertically so that "H" type designs or low level frames can be manufactured to support either machinery or ducting.

They have a maximum working load of 334kg each, but as with the Pyramid ST system, they can be combined to increase the loading capacity.

The pyramid H Base has the following dimensions ;

Dimensions : 314 x 314 x 117mm

We stock a full range of HDG channel, spring nuts and bracketry that can be ordered separately. If you need any help with your design, please give our Sales team a call on 020 7537 6500.